• United States Department of Labor ID badge for Meredith Perez, Office Manager, issued on April 14, 2010, and expiring on May 5, 2015. This FIPS 201 Approved badge includes an RFID blocking feature and fits securely in a convenient Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081.
  • A hand holding a small rectangular metal object with a clear plastic edge and an RFID blocking GSA Approved logo in the lower right corner.
  • Two clear plastic badge holders, one vertical and one horizontal, are displayed on a wooden surface with badge reels attached. Text above reads: "Works with Horizontal or Vertical Badges. Badge Reels Shown are Not Included." Great for identity theft prevention. Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081
  • A hand holding a flat card labeled "Driver's License, TWIC, PIV, CAC, RFID, Smart Card - (13.56 MHz Flat Cards)" with a green check mark; an X mark next to a clamshell card labeled "125 kHz Low Frequency Cards." The image underscores the importance of using products like the Rigid Shielded RFID Blocking 2 Card Holder Blocks 13.56 Mhz (FIPS 201 Approved) 1840-5081 for identity theft protection.
  • A hand holding a clear Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081 displays cards with the text "Specialist ID, Inc." and numbers "1" and "2," providing convenient access while helping with identity theft prevention.
  • Photo ID badge for Brent Peterson, marked as a Municipal Attorney for Edmond Municipal Bureau. Includes a photo, ID number #000054154958, Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081 chip, and dates stating "OCT2019" and "EMB".
  • A hand holding a clear plastic device with an extendable metal blade and a Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081, designed for convenience.
  • A **Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081** with a rectangular shape, featuring rounded corners, a small air cushion on the left side, and 2-card capacity with RFID blocking technology.
  • Close-up of a name badge featuring a headshot of a man with dark hair, wearing a white shirt and tie, enclosed in a Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081 with a barcode visible at the bottom.
  • A FIPS 201 Approved Rigid Shielded RFID Blocking 2-Card Holder (FIPS 201 Approved) 1840-5081 with a Specialist ID Inc. logo on a black lanyard with a metal clip.
1 10

Rigid Shielded RFID Blocking 2 Card Holder Blocks 13.56 Mhz (FIPS 201 Approved) 1840-5081

Rigid Shielded RFID Blocking 2 Card Holder Blocks 13.56 Mhz (FIPS 201 Approved) 1840-5081

IN STOCK
(-Infinity%)
 
 
 
 
 

Bulk Ordering? Complex Project? Click Here.

Currently, we have 0 available. Please contact us to inquire about lead times. Sorry, this item is currently out of stock, please contact us to confirm lead times and availability. You can click here to discover additional alternative recommendations.

Features

  • Part number: 1840-5081
  • Holds two 30 mil ID cards
  • Thumb-notch on both sides for easy card removal
  • Slot pull strength of 89lbs
  • FIPS 201 Approved
  • Meets BAA (Buy America Act) & TAA (Trade Agreement Act)
  • Outside Dimensions: 3 7/16" x 2 5/16"
  • Inside Dimensions: 3 3/8" x 2 1/8"
  • Shielded to protect info on 13.56MHz RFID Cards
  • MADE IN USA
  • GSA Approved
  • Hangs Horizontally or Vertically
Jump to Description
View full details

Description

Rigid Shielded 2 Card Holder (FIPS 201 Approved)1840-5081

The new Cardprotectors™ rigid shielded RFID blocking 2-Card Holder protects personal information on up to 2 credit or debit cards with an insert size of 3 3/8" X 2 1/8" (86 X 54Mm), or any 13.56 Mhz Rfid technology card, including mifare, Iclass, piv, cac, twic and frac cards from identity theft. Today there are over 200 million credit cards that feature RFID technology, and criminals are using this technology to their advantage by stealing private information with easily obtainable antennas to acquire personal information.

However, this RFID Blocking 2-Card Holder offers a preventative measure by not allowing the card to be read unless it is removed from the card holder. Shielded badge holders are not only recommended, but even required for many US Government agencies, and private entities, for any ID card using RFID technology. If you do not need a shielded holder, but are looking for a similar product, please see the 1840-6560 rigid badge holder.

 

There is no minimum quantity to order this Shielded ID Badge Holder!

Items in alternative photos are for reference only.

Additional items in alternative photos are sold separately.

Submit Feedback

×

We'd really like to hear any feedback that you might have for us! This will help us improve our website and make it a better experience for you.

Reviews